Steel Guide System | Fixing Elements
Mounting with channel brackets The channel brackets are mounted at the joints, ensuring precise connection of the joints in addition to mounting the channel to the substructure. ■ ■ Optimum alignment of the joints ■ ■ Reduced installation times ■ ■ No welds ■ ■ Minimum number of screw connections ■ ■ Reliable mounting under rough conditions ■ ■ High stability
h KA
2
70
3
1
15
D1 [mm]
s [mm]
h KA [mm]
D1
123 175 208 257
11 13 13 13
2 2 2 2
As a standard, the channel brackets included with the delivery are installed on all joints as well as at both ends of a channel. If you require more chan- nel brackets beyond this, please state this when ordering. The sheet metal thickness “s” corresponds to the respective wall thickness “s” of the channel.
Fixing kit (optional) The delivery scope of the Steel Guide System does not include the optional joining clamp fixing kit.
Calculating C-profile length
Suitable perforated C-profiles can be found from page 733
C-profile length L P L P = B KA + 50 mm C-profile length L P rounded to 50 mm
Befestigungsset 1 C-rail (length depends on b 1 ) 2 T-head bolt M10/M12
3 Hex nut 4 Washer
Order
To order the Steel Guide System , please provide the following information: ■ ■ Number of guide channels ■ ■ Total length of channel ■ ■ Support length L KA ' ■ ■ Ouer height of guide channel h KA ■ ■ Inner width of guide channel b 1 ■ ■ Material
■ ■ Support height h 1 ■ ■ Delivery (unmounted/mounted) ■ ■ Fixing with or without C-profile
720
Made with FlippingBook Digital Proposal Creator