LineFix clamps | Overview
■ ■ For C-rails with 11 mm slot width. ■ ■ For one, two or three cables stacked.
■ ■ Optimized foot geometry for secure seating in the C-profile. ■ ■ High grade corrosion protection of the coated housing body through cathodic dip coating (CDC). ■ ■ Pan design with support ribs for secure fixing of the cables. ■ ■ Rounded design of the pan elements, gentle on the cables. ■ ■ Also available in stainless steel (ER 1S) .
Pan design with opti- mized geometry. The curved support ribs fix the cables very gently and reliably. The data for the total height are guide values. The actual height depends on the cable diameter and the cable structure, among other things.
Width
24
11
Secure seating and easy assembly In practical operation, tensile forces occur in both cable directions. Clamps therefore have to transmit high tensile forces in the respective direction. In contrast to standard commercial clamps, the LineFix ® foot geometry ensures transmission of extremely high tensile forces equally in both directions. The catch fixes the foot securely in the C-profile when it is bolted on, preventing the crossbar from tipping out during load application, regardless of the direction of forces or installation.
Easy installation even in tight packaging spaces through headless screw with hexagon socket.
F
F
Observe minimum height For cable carriers in a gliding application, the system height of the strain relief must not be higher than the chain link height!
!
744
Made with FlippingBook Digital Proposal Creator