Configuration guidelines | Installation options
INV 6 Horizontal arrangement, rotated 90° (straight)
The cable carrier used in normal horizontal direction is rotated by 90°, i.e. it glides on its outside or on special slide discs on a tray or in a channel. This arrangement can be implemented with almost all cable carrier types.
Application: Generally, cable carriers “rotated 90°” are used when the installa- tion situation is primarily short on space with respect to height, preventing normal horizontal installation. The installed cables have to be guided in the cross section of the cable carrier with fixed separating elements or in a hole crossbar , clearly separated from each other. This is the only way to prevent dam- age in the long run. The technically best solution is the hole crossbar which provides the most secure guiding for the cables.
Link crossbar with movable dividers
Link crossbar with fixed dividers
Best possible sepa- ration of cables in a hole crossbar
Systems for short travel lengths (with/without support) The cable carriers can be used unsupported in the horizontal arrangement “rotated 90°” to a limited extent. The permitted unsupported length depends on the following parameters for this installation option as well: ■ ■ additional load q z ■ ■ travel length L S ■ ■ bending radius KR ■ ■ cable carrier width B k ■ ■ connection option If the additional load and the unsupported length are too great, the cable carrier has to be supported on one side or overall.
System without support
System with single-sided support
System with overall support
81
Made with FlippingBook Digital Proposal Creator