Materials information | Plastics
1.2 Special materials
Special materials are modified plastics which are suitable for applications outside the standard. There are different options for a variety of different requirements. The following table can help with the selection of the correct material for the application at hand. It has to be noted that not all materials can be used in all products. Please contact us.
Plastic type
Property
Code
Standard material for common applications Performance range according to material data sheet Special material for ATEX application following ATEX Directive 2014/34/EU
7422 7370
PA6 GF35
PA6.6 GF
7400
PA6.6
Standard material for UMB
7408
Standard material for ROBOTRAX ®
7412
POM
Impact-strength-modified special material for use in cold environments
PA6 GF30
7488
PA46 GF30
Modified special material for use in hot temperature areas 7241
Modified special material with special requirements for fire behavior (V0) Modified special material with conducting properties for voltage (ESD) Special material for absorbing contact temperatures up to 800 °C (cross-linking)
PA66 GF25
7414
PA66 CF
7366
PA6 GF 35 cross-linked
Indicate cross-linking when ordering.
1.3 Material code
Codes are assigned to each plastic to differentiate between the different plastic materi- als. The code has four digits and can be identified as a simplified code on most plastic components. This is embossed into the component on a material dial at the side of the chain links of the cable carrier.
Code
Coding
Material
7422
AD
PA6 GF35
Example of material dial
93
Made with FlippingBook Digital Proposal Creator