A member of the TSUBAKI GROUP
Technical Handbook design considerations, tips and helpful information
Step 7 Select Bracket Style And Mounting Position (continued)
2 Piece Standard Mounting Bracket
Standard 2 Piece Mounting Brackets Commonly used on mono molded link type carrier systems, KabelSchlepp 2 piece mount- ing brackets are commonly offered with or without integral strain relief. In some cases, the optional strain relief piece can be detached from the bracket and mounted separately for ad- ditional installation options. Brackets are made of nylon, hybrid nylon & aluminum, or steel dependent upon size and type of carrier system.
UMB (Universal Mounting Brackets) Because UMB brackets can be attached to the mounting surface from above, below or at the front of the bracket, they allow a great deal of installation options from a single bracket type. Dependent upon size and type of carrier, these brackets are made of reinforced nylon (smaller sizes) or cast aluminum (larger sizes).
4 Piece Standard Mounting Bracket
Standard 4 Piece Mounting Brackets Offered on a wide range of KabelSchlepp carrier systems, 4 piece standard brackets offer a wide range of possible mounting positions. 4 piece brackets are typically made of high strength stamped steel. Specifying Mounting Position Most Kabelschlepp mounting brackets can be installed in multiple different positions dependent upon the application. See each product's individual mounting bracket pages for available options. A sample mounting bracket configuration is shown below:
Bracket End M - Moving End F - Fixed End Bracket Position A - connecting surface on
For 4 pc brackets with positionable feet:
MH
MA (Standard)
A I (Standard)
outside radius (standard)
MI
I - connecting surface on inside radius H - connecting surface turned 90° to the outside radius K - connecting surface turned 90° to the inside radius U - Universal Bracket (not pictured, see opposite page)
MK
FK
I (Standard) A
FI
Bracket feet on the standard 4 pc brackets can be positioned facing inward (I) which is the standard position or facing outward (A)
FA (Standard)
FH
Please specify the desired bracket variant and position when ordering . Example: FAI/MAI (Standard) or FAA/MIA The bracket positions at the Fixed End and Moving End can be changed later if required.
Specifications are subject to change without notice. KSA-0810-GC
Need help? 1-800-443-4216 or www.kabelschlepp.com
2.11
Made with FlippingBook Digital Proposal Creator