Carrier Frame Stay System Options
DESIGN CONSIDERATIONS - Section 1
The numerous frame stay configurations explained below offer the designing engineer a wide range of options suitable for almost any application requirement. Custom designed options specifically designed to suit your unique application can be developed by our engineering department. For custom designs or assistance, please contact KabelSchlepp’s technical office: 1-800-443-4216 or www.kabelschlepp.com. Type: MONO
Mono type frame stays are molded at fixed widths and typically come in non-opening and opening versions, dependent upon the size and series of the cable carrier. Systems with a mono type frame stay tend to be less expensive and have less configuration options than comparably sized systems using modular frame stays. Type: RE Standard open style system - installation uses twist in/out bars – selected for its ease to access the carrier system cavity. Can be ordered in 8 mm (smaller sizes) and 16 mm (larger sizes) custom width increments. Smooth fiber reinforced molded polymer bars. Type: RS Standard open style system - installation uses two twist in/out aluminum bars - selected for its ease to access the carrier system cavity. Any custom cavity width can be ordered. Smooth cable/hose friendly extruded light weight aluminum bars. Type: RS 2 Standard open style system - installation uses two bolts per bar - selected for its strength and ease by which the carrier system cavity can be accessed by removing the bolted-in bars. Any custom cavity width can be ordered. Smooth cable/hose friendly extruded light weight aluminum bars. Type: RV Standard open style system - installation uses twist in/out reinforced bars – selected for its added strength and extreme ease to access the carrier system cavity. Can be ordered in any custom cavity width. Smooth cable/hose friendly reinforced extruded aluminum bars. Type: RMS Standard open style system - typical installation uses four bolts per bar – selected for its super-duty strength and rigidity and ideal for extra wide and heavy carrier systems. Carrier system cavity can be easily accessed. Any custom width can be ordered. Smooth and wide cable and hose friendly extruded aluminum bars for superior protection against cable/hose wear. Type: RMR Standard open style system - installation uses four bolts per bar – selected for its strength, rigidity and best-in-industry cable/ hose friendliness. Any width can be ordered. Smooth and durable cable/hose friendly extruded aluminum bars available with free-rolling integral Delrin ® support and dividing systems for ultimate protection against cable/hose wear. Type: RMD/RDD Standard enclosed cavity system - installation uses four bolts (RMD) or snap-on lids (RDD) – expressly designed for applications requiring protection against debris. Available in fiber reinforced molded polymer (RDD) or smooth high strength extruded aluminum materials (RMD). RMD's aluminum lids can be ordered in custom specified widths. MT's nylon lids are available in standard width increments of 8 mm (smaller sizes) or 16 mm (larger sizes). RMD aluminum lids are suitable for protection against red-hot debris. Type: RMA Custom open cavity extender system - installation uses four bolts and twist in/out bars – specifically designed for applications in which large diameter hoses need to be carefully guided. Any custom width can be ordered. Smooth cable/hose friendly extruded aluminum bars and high strength polymer extender bars. This system can only glide on itself when extender bars are attached to the outer radius together with an open bottom style guide channel. Type: LG Custom open hole style system - installation uses four bolts per bar – selected for its super-duty strength, rigidity and precise separation and placement of all cables/hoses on the carrier system's neutral axis (where the cable/hose relative movement is minimized). Cables and hoses can be easily accessed for maintenance. Any custom width, hole size and shape can be ordered. Type: RS 1 Standard open style system - installation uses twist in/out aluminum bars on the outside radius and bolted-in aluminum bars on the inside radius - selected for its ease to access the carrier system cavity. Any custom cavity width can be ordered. Smooth cable/hose friendly extruded light weight aluminum bars.
Specifications are subject to change without notice. KSA-0810-GC
2.12
Made with FlippingBook Digital Proposal Creator