L S
l 1
L S 2
DynaGlide KS (used with STEEL cable carrier systems) The unique DynaGlide KS system should only be used when the need for a steel chain system is a requirement in an extended travel application exceeding the unsupported length of more than 4x. This system uses the same basic system configuration as an extended travel polymer system gliding in a guide channel. However, it will be significantly heavier, has greater push-pull forces and is more expensive to use than a similarly sized polymer system from KabelSchlepp. EXTENDED TRAVEL - DynaGlide KS for STEEL Carrier Systems L KA Festpunkt Auflage Determining the chain length: L B see technical data for selected chain type! Moving End Fixed End Sliding Tray Guide Channel Mitnehmer
L S
L S
l 1
L S 2
L S 2
Mitnehmer Moving Ends
U B
X
Mitnehmer Moving End
Guide Channel The chain length is determined the same as for the single-sided arrangement!
It should be noted that for a moving application, both cable carriers should be designed to the same length and width.
Auflage
Festpunkt Fixed End
Sliding Tray
Festpunkt Fixed Ends
X
L KA
L KA
Opposing 2-Sided Cable Carrier Arrangement
Single-Sided Cable Carrier Arrangement
The support construction of the guide channel needs to have the required stability.
L S
L S 2
Mitnehmer Moving Ends
U B
X
T echnical data – Dimensional details of guide channels see system components.
LS 2
*
LK should be rounded up to the nearest pitch ( t )
L k = *
+ LB + KR
Because of the many design parameters which need to be conside- red such an installation as this should be planned and designed by our engineers!
Festpunkt Fixed Ends
X
L KA Abbreviations Lk = The required/calculated carrier system length LB = The loop length (directly related to the KR ) The support construction of the guide channel needs to have the required stability.
LS = Total machine travel RKR = Reverse bend radius
VARITRAK S steel cable carrier with DynaGlid e KS extended travel system (inset: replaceable glide-shoe detail)
T echnical data – Dimensional details of guide channels see system components.
Because of the many design parameters which need to be conside- red such an installation as this should be planned and designed by our engineers!
With its shallow angle of attack when transitioning into the gliding position, DynaGlide KS is ideal for extending the life of cables and hoses in extended travel applications.
DynaGlide KS allows extremely long travel lengths and can be used in standard single system or opposed two carrier configurations.
DynaGlide KS can be used with large and small carrier types with a wide variety of bend radius and frame stay system options.
Specifications are subject to change without notice. KSA-0810-GC
2.30
Made with FlippingBook Digital Proposal Creator