Syringe Easy, Fast and Safe in the Root Canal
a b c
STEP 1 Slight pressure on the plunger and premixed material is dispensed from the tip.
STEP 2 Either insert GuttaFlow 2 into the root canal with the master point (a), the last used apical file (b) or a lentulo spiral (c).
STEP 3 Coat the masterpoint with sufficient GuttaFlow 2 and set the apical stop. Depending on the clinical situation accessory gutta-percha points can be coated and inserted. GuttaFlow 2 combines sealer and gutta-percha in one product, the use of any sealers is not required. No lateral or vertical condensation is necessary.
STEP 4 Slowly insert the master point permanently. Depending on the clinical situation accessory gutta-percha points can be coated and inserted. GuttaFlow 2 combines sealer and gutta-percha in one product, the use of any sealers is not required. No condensation is necessary.
STEP 5 Sear off the master point with a heated hand instrument.
Capsule
3 mm
STEP 1 Determination of the working length.
STEP 2 Move the green rubber stop 3 mm down towards the tip opening.
STEP 4 Remove the green activation pin from the capsule, twist the pre-set canal tip with endo stop and insert the capsule into the dispenser.
STEP 3 Push the cap down over the capsule and then remove it. Mix GuttaFlow 2 (capsule) for 30 sec. in a triturator.
STEP 5 Dispense GuttaFlow 2 into the canal until you can see the material.
STEP 6 Then coat the masterpoint with GuttaFlow 2.
STEP 7 Then permanently place the master point and fill the remaining canal space with GuttaFlow 2.
STEP 8 Finally shorten the master point with a hot instrument.
Made with FlippingBook Ebook Creator