HyFlex ® EDM NEXT GENERATION ONE FILE NiTi SYSTEM
HyFlex ® EDM : Stays on Track
*OneFile (25/~) is constructed with a variable taper
COLTENE Covers the Entire Endo Procedure
Restoration
Diagnosis
Infection Control
Obturation
https://www.newchic.com/ womens-san- dals-3601/p-1286079.html?rm- mds=category
Temporary Restoration
Access
COLTENE offers a complete line of endodontic products for the root canal procedure, from diagnosis through restoration.
Debridement
Medicamentation
Working Length Measurement
Drying
Visit coltene.com/products/endodontics to view the entire endo line.
Canal Preparation
Irrigation
HyFlex ® EDM Unmatched Flexibility and Fracture Resistance in a One File System HyFlex EDM offers the dental practitioner enhanced ease of mechanical preparation of the root canal so that even newcomers to endodontics can achieve reliable results quickly and easily.
Stays on Track
Thanks to controlled memory properties, HyFlex EDM files follow the anatomy of the canal, which can significantly reduce the risk of ledging, transportation and perforation.
Fewer Files Required
The combination of flexibility, fracture resistance and cutting efficiency of the HyFlex EDM makes it possible to reduce the number of files required for cleaning while preserving anatomy.
Extreme Fracture Resistance
HyFlex EDM files are produced using an innovative manufacturing process called Electrical Discharge Machining. The EDM process results in a file that is extremely flexible and fracture resistant. In fact, HyFlex EDM files are up to 700% more resistant to cyclic fatigue compared to traditional NiTi files.*
Pre-Sterilized, Modular System
Provided as a modular system of sterile instruments, HyFlex EDM includes Shaping, Glide Path, OneFile, Orifice Opener and Finishing files and may be used in combination with HyFlex CM files.
*Int Endod J. 2015 May 22. doi: 10.1111/iej.12470
HyFlex EDM OneFile at a Glance
Pre-Sterile
Unmatched Fracture Resistance
Uniquely hardened surface reduces risk of file separation
Contributes to high breakage resistance Variable Cross Section Design
Almost triangular cross section at top
Cutting Efficiency
Hardened surface plus controlled memory improves cutting efficiency
Trapezoidal cross section in middle
Extremely Flexible
Controlled memory allows superior canal tracking
Quadratic cross section at tip
Visit COLTENE’s YouTube channel for more information about the HyFlex EDM and EDM technology.
Fewer Files Required for Canal Preparation
Simple Canals
Regeneration by Thermal Treatment
Access Opening (Optional)
Glide Path
Shaping
The built-in shape memory of HyFlex EDM files prevents stress during canal preparation by changing their spiral shape. A normal autoclaving process** is enough to return the files to their original shape and fatigue resistance. Should the file fail to regain its shape after heat treatment, risk of fracture is increased, and the file should not be used after visual inspection.
CORONAL
MIDDLE
APICAL
25/.12 Orifice Opener
10/.05 Glide Path File
25/~ HyFlex OneFile*
Before use
Medium Canals
After use
Access Opening (Optional)
Glide Path
Shaping
After heat treatment
**Follow manufacturer’s recommended settings
CORONAL
MIDDLE
APICAL
10/.05 Glide Path File
25/.12 Orifice Opener
20/.05 Preparation File
25/~ HyFlex OneFile
Max Curve Canals
Finishing files are available if case requires
Finishing
Access Opening (Optional)
Glide Path
Shaping
CORONAL
MIDDLE
APICAL
20/.05 Preparation File
25/.12 Orifice Opener
10/.05 Glide Path File
15/.03 Glide Path File
40/.04 50/.03 60/.02 Finishing Files
HyFlex EDM Electrical Discharge Machining
• Up to 700% higher fracture resistance* • Uniquely hardened surface • Less filing required for treatment success
The HyFlex EDM owes its unique properties to a breakthrough technology called “Electrical Discharge Machining.” This innovative manufacturing process uses spark erosion to harden the surface of the NiTi file, resulting in superior fracture resistance and improved cutting efficiency. Just like HyFlex CM files, HyFlex EDM files offer trusted controlled memory effect and regenerative properties.
*Int Endod J. 2015 May 22. doi: 10.1111/iej.12470
Image courtesy Dr. Chiara Pirani and Dr. Francesco Iacono, University of Bologna
Average value measured at 60º curvature with 9 mm radial length
Number of cycles to failure
HyFlex EDM OneFile
HyFlex CM 06-25X-Tra
TwistedFiles 06-25**
ProTaper Next X2**
0
500
1000
1500
2000
2500
3000
3500
4000
Source: Internal Tests/ **not a trademark of COLTENE
Praise for HyFlex EDM Files
Research Support for HyFlex EDM Files
“
“
I did a case with 3 EDM files and absolutely loved them! I cut through that curved anatomy like butter…No unwinding noted at all.
Within the limitations of the present in vitro study, it was found that cyclic fatigue resistance of HyFlex EDM files was higher than the cyclic fatigue resistances of OneShape, Reciproc Blue, and WaveOne Gold files.
— Sam Alborz, DDS, CAGS
— Mustafa Gündoğar, DDS, PhD, and Taba Özyürek, DDA, PhD, J Endo 2017; ;1-5
HyFlex EDM Order Information
Catalog Number
Description
15mm 21mm 25mm 60019630
25/.12 Orifice Opener
60023574 60022281 60022287 60022282 60022283 60022284 60022285 60023576 60022279 60022288 60022280
60023573 15/.03 Glidepath File 60019628 10/.05 Glidepath File 60022286 20/.05 Preparation File
60019629 25/~ OneFile
60019631 40/.04 Finishing File 60019632 50/.03 Finishing File 60019633 60/.02 Finishing File
60023575 Shaping Set - Max Curve 15/.03, 10/.05, 20/.05 60019641 Shaping Set - Simple 25/.12, 10/.05, 25/~ One File 60022289 Shaping Set - Medium 10/.05, 20/.05, 25/~ One File
60019642 Finishing Set 40/.04, 50/.03, 60/.02
Sets include 3 instruments per package
Catalog Number
Description
60021895 HyFlexEDM IntroKit Compact* (1 each) 25/.12, 10/.05, 25/~, 40/.04, 50/.03, 60/.02, HyFlex EDM Gutta Percha Assortment, HyFlex Organizer
*Available only in the United States
Size / taper
Adhesive-free paper points 100 pcs
Latex-free Guttapercha points 60 pcs
20/.05
60022742
60022706
OneFile 25/~
60022743
60022707
40/.04 50/.03 60/.02
60022676
60022708
60022741
60022709
60022740
60022710
Assortment 20/.05 - 60/.02
60022744
60022705
HyFlex EDM Accessories
Catalog Number
Description
60018783
HyFlex File Organizer
H8CPCLINTRO
CanalPro Cordless Handpiece
Sealers and Obturation
Catalog Number
Description
60013701
GuttaFlow 2 Automix Standard Set
Coltène/Whaledent AG Feldwiesenstrasse 20 9450 Altstätten / Switzerland Tel. +41 (0)71 757 53 00 Fax +41 (0)71 757 53 01 info.ch@coltene.com
Coltène/Whaledent GmbH + Co. KG Raiffeisenstrasse 30 89129 Langenau / Germany Tel. +49 (0)7345 805 0 Fax +49 (0)7345 805 201 info.de@coltene.com
Coltène/Whaledent Inc. 235 Ascot Parkway Cuyahoga Falls, OH 44223 / USA Tel. USA & Canada +1 800 221 3046 +1 330 916 8800
coltene.com
Fax +1 330 645 8704 info.us@coltene.com
© 2018 Coltène/Whaledent Inc.
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6Made with FlippingBook Ebook Creator