Tip 1: if you have a sublimation printer, you can print a black colour name over the bottle after you followed the top 5 steps.
Step 1: After the bottle is printed with the hydro paper, cut out a black name that you have printed with your sublimation printer and normal sublimation paper and secure it to your bottle with heat tape. Step 2: Take a normal copy paper and wrap it around the product to protect the bottle from fading or damaging.
Step 3: Place in a heat shirk bag and shrink….then bake in the oven again with the correct time and temp. Remove the heat shrink bag, paper, and print and it is done.
Tip 2: If you only want to create a name on the bottle with no full wrap with the Hydro paper:
1. Mirror the artwork 2. Stick a piece of application Tape (the one that looks like Masking Tape) on your mat with the sticky side facing up 3. Cut a big enough piece of Hydro sublimation paper to fit your artwork, and put it pattern side facing up on the application tape. 4. Cut settings should be set to only cut the Hydro paper, and not the application tape as well. Blade 1; Speed 1; Force about 18 or less. (do a test cut first) 5. Weed the artwork, and place the hydro paper with application tape on the bottle. 6. Place in a heat-shrink bag, and then in the oven (160 degrees and 9min) turning the bottle around halfway
Made with FlippingBook - professional solution for displaying marketing and sales documents online