2
If you want to personalize your shield first before you assemble it,
follow these steps:
Step 1: You will use “ Videoflex White Shiny Subli ” to personalize your shield. This Videoflex will be available at the JG Electronics store.
Open the template for the face shield witch you will find on the JG electronics Template CD under Masks and Face shield.
Step 2: Place a piece of die video flex on top of your mat, the white side will face your mat and the silver side will face up. Use normal video flex settings on your vinyl cutter. The blade will be set on number 1 or 2 and the force will be set between 12-15. Always test cut first.
Weed the sheet of vinyl after you have cut it out (Remove all the unwanted areas).
Set your heat press to 165°C and 90 seconds .
Step 3: Peel off one of the templates that were cut with the cameo vinyl cutter from the plastic backing. Print your sublimation artwork so long. Remember to cut your sublimation artwork as close as possible to the print with your scissors, to make lining up easier.
Made with FlippingBook - professional solution for displaying marketing and sales documents online