ROAD STUDS
ROUND POLYCARBONATE SOLAR ROAD STUDS A road stud with an attractive design, equipped with 3 flashing LEDs on each side. Completely self-powered, to clearly highlight locations where accidents are more likely. Dimensions: ø 116 mm x 25 mm high. Polycarbonate road stud: attach to ground with epoxy glue and screws (not included). Self-powered: a fully-charged road stud has enough power for over 72 hours of operation (full charge requires 8 hours of exposure to daylight). Waterproof (IP68), visible from over 500 metres away, and can withstand pressure up to 10 tonnes. All road studs must be used and installed in accordance with local highway legislation and safety requirements. Features: 3 flashing LEDs on each side. Choice of 2 LED colours: white or blue.
ALUMINIUM SOLAR ROAD STUDS
A road stud powered by a photovoltaic panel and protected by a solid aluminium casing to improve road safety by clearly marking the edges of the road. Dimensions: 105 x 105 x 25 mm. Installation attached to the ground with epoxy glue (not included). Features: 3 flashing white LEDs on each side. Self-powered: a fully-charged road stud has enough power for over 72 hours of operation (full charge requires 8 hours of exposure to daylight). Waterproof (IP68), visible from over 500 metres away, and can withstand pressure up to 10 tonnes. All road studs must be used and installed in accordance with local highway legislation and safety requirements.
Code
120000
White LEDs, two-sided
120010
Blue LEDs, two-sided
120012
■ Code 120010
ALUMINIUM SHELL SOLAR ROAD STUDS
REFLECTIVE GLASS ROAD STUD
These high-quality road studs consist of an indivisible aluminium shell and a solar stud made of polycarbonate. Three flashing LEDs on each side provide total visibility for the area to be protected. Dimensions: ø 126 mm x 60 mm high. Installation: stud embedded after core drilling. Self-powered: a fully-charged road stud has enough power for over 72 hours of operation (full charge requires 12 hours of exposure to daylight). Waterproof (IP68), visible from over 500 metres away, and can withstand 20 tonnes of pressure. All road studs must be used and installed in accordance with local highway legislation and safety requirements. Features: 3 flashing LEDs on both sides. Choice of 2 LED colours: white or blue.
Two exceptionally cost-effective solutions for installation along road edges or at hazardous locations. The studs reflect the light from head lamps to attract drivers’ attention and prevent accidents (especially in poor visibility conditions: fog, rain, etc.). Dimensions: • Large model: protrudes 19 mm, ø 100 mm, 44 mm high. • Small model: protrudes 11.5 mm, ø 51 mm, 56 mm high. Installation: tempered-glass studs, embedded after core drilling. Omnidirectional (360°). Do not install in areas where heavy vehicles may drive over the studs. All road studs must be used and installed in accordance with local highway legislation and safety requirements.
ø 100 mm 120020 ø 50 mm 120021
White LEDs, two-sided
120005
Blue LEDs, two-sided
120007
■ Code 120021 ø 50 mm
Compliant with standard EN 1463
■ Code 120020 ø 100 mm
■ Code 120007
41
Made with FlippingBook - professional solution for displaying marketing and sales documents online