Safety training
GWO Advanced Rescue Training Standard / V4 2023-05-02
Ensure a good hold on the load. Where possible, hug the load as close as possible to the body. This may be better than gripping it tightly only with the hands. Moderate flexion (slight bending) of the back, hips and knees at the start of the lift is preferable to either fully flexing the back (stooping) or fully flexing the hips and knees (full/ deep squatting) Don’t flex the back any further while lifting. This can happen if the legs begin to straighten before starting to raise the load. The worker should start the movement with the strong leg muscles while keeping the back posture constant.
Avoid twisting the back or leaning sideways especially while the back is bent . Keep shoulders level and facing in the same direction as the hips. Turning by moving the feet is better than twisting and lifting at the same time. Keep the head up when handling . Look ahead not down at the load once it has been held securely. Move smoothly . Do not jerk or snatch the load as this can make it harder to keep control and can increase the risk of injury. Don’t lift or handle more than can be easily managed . There is a difference between what people can lift and what they can safely lift. If in doubt, seek advice or get help.
Figure Annex 5.4 – Basic lifting operations 3
3 UK Government Copyright (by permission)
Global Wind Organisation©2023 / www.globalwindsafety.org
178 / 181
Made with FlippingBook flipbook maker