Safety training
Control of Hazardous Energies Standard / V3 2023-12-04
12. MODULE 3 – COHE PRESSURE FLUID SAFETY MODULE
12.1 Aims and Objectives of the CoHE Pressure Fluid Safety Module The aim of GWO’s CoHE Pressure Fluid Safety training module is to enable the participants to support and care for themselves and others while working with and in the vicinity of pressure fluids in the wind industry and to perform assigned tasks safely and efficiently. Upon successful completion of GWO’s CoHE Pressure Fluid Safety Module, the participants will be able to reduce the associated risks to and work safely with pressure fluid tasks in the wind industry by being able to select the correct and required PPE for working with hydraulic fluids and fluids under pressure, using safe work practices and establishing a safe work condition when working with and in the vicinity of pressure fluids in the wind industry.
Overall learning objectives for the CoHE Pressure Fluid Safety Module, the participants can:
1) Take responsibility for their own and others safety while working with and in the vicinity of pressure fluids in the wind industry (Ability, intermediate level)
2) Take responsibility for correctly completing a simple permit to work from beginning to end as the person responsible for establishing a safe work condition (Ability, intermediate level)
The GWO CoHE Pressure Fluid Safety Module is aimed towards improving the participants´ ability to “work safely” with pressure fluids. This means that the CoHE Pressure Fluid Safety Module is not aimed at improving candidates´ technical knowledge, skills, and abilities regarding pressure fluids. Participants should already possess these technical knowledge, skills, and abilities before attending the module. Similarly, it is not the intention of the GWO CoHE standard to promote the acquisition of advanced knowledge, such as troubleshooting.
Note
12.2 Duration of the CoHE Pressure Fluid Safety Module
The total contact time for completing this module is 7 hours and 0 minutes. This is based on the times given in the module timetable.
The training provider must not exceed the times per day given in table 12-2 below.
Maximum Duration Per Day
Contact time
8 hours
Total training day
10 hours
Table 12.2.1 - Maximum durations for training day
Global Wind Organisation ©2023 / www.globalwindsafety.org
104 / 143
Made with FlippingBook Online newsletter maker