Safety training
Control of Hazardous Energies Standard / V4 02052025
55) Act independently in treating all pressure systems as pressurised until a safe work condition has been established (Ability, intermediate level)
56) Take responsibility for establishing a safe work condition (Ability, intermediate level)
57) Act independently in following and completing safety documentation such as permits (Ability, intermediate level)
The instructor shall:
Explain safety procedures in the training area
Facilitate scenario-based practice where each participant must practise and demonstrate through relevant scenarios related to hydraulics (oils under pressure) with varying degree of complexity and fading instructor guidance and support
Establishing and maintaining a safe work condition. As a minimum each participant shall practise:
a.
preparing for and planning the work
b. following and completing safety documentation such as permits
c.
pre-task briefings
d. selecting and using the correct PPE for a given task
e. pre-use check on pressure fluid test equipment and hoses
f. safe isolation and safe dissipation of pressure in a pressure system
g. identifying and mitigating pressure fluid hazards such as trapped pressure
h.
identifying deranged equipment
i.
testing for absence of pressure
j.
apply Lockout-Tagout
k.
searching for leaks in a pressurised system safely
Give constructive feedback or facilitate peer feedback throughout the scenarios
The participants shall:
Practise and demonstrate how to establish and maintain a safe work condition
Think on the received feedback and use the feedback to improve their performance
Global Wind Organisation ©2025 / www.globalwindsafety.org
133 / 145
Made with FlippingBook Online newsletter maker