Safety training
Control of Hazardous Energies Standard / V3 2023-12-04
ANNEX 1 - EQUIPMENT LIST
The following pages contain the lists of equipment required for delivering the CoHE training standard.
All equipment shall be maintained and where appropriate, inspected and tested in accordance with current national standards/ legislation and manufacturers’ recommendations.
Note
1.
CoHE Basic safety Module
The following equipment is required for the instructor during the entire duration of this CoHE Basic Safety Module to meet the needs of the CoHE Basic Safety Module:
• Three kits of basic PPE (gloves, safety goggles, safety shoes or boots and working clothing)
•
Lockout-Tagout equipment. As a minimum:
o 3 x padlocks o 3 x caution notices / tags
Any equipment used during this GWO training module shall meet or exceed the minimum requirements of the national standards in the country where the training is taking place. When working in a country where there is no applicable national standard then the equipment shall meet or exceed the minimum requirements of the European standards.
2.
CoHE Electrical Safety Module
The following equipment is required during the entire duration of this CoHE Electrical Safety Module to meet the needs of this CoHE Electrical Safety Module. • PPE suitable for electrical work (Insulating gloves (at least one pair per two participants), googles, safety shoes or boots and suitable clothing)
•
Lockout-Tagout equipment. As a minimum:
o 6 x padlocks o 6 x caution notices / tags o An example of accessories for locking certain components e.g. different types of circuit breakers, hydraulic needle valves.
Measuring devices:
•
Category III 600 V multimeter (at least 1 per four participants)
•
Two pole voltage detector (at least 1 per four participants)
Global Wind Organisation ©2023 / www.globalwindsafety.org
135 / 143
Made with FlippingBook Online newsletter maker