Safety training
Control of Hazardous Energies Standard / V4 02052025
An electrical system which as a minimum must be able to:
•
Be live
•
Be switched off and on
•
Have accessible measuring points
•
Have Lockout-Tagout applied to the system
•
Have corresponding diagrams which reflect all components and connections
•
Have stored energy (e.g. a 12V dc battery)
•
Have at least 2 loads with their respective isolations from the main source
• All components should be reflected in the electrical diagram showing all connections
The electrical system should contain at least:
•
A 12 V battery
•
Electrical protection
•
Appropriate electrical wires
•
Switches
•
Capacitors
•
Terminals for rail
•
Push buttons (NO and NC)
•
1 contactor or relays for each load
Any equipment used during this GWO training module shall meet or exceed the minimum requirements of the national standards in the country where the training is taking place. When working in a country where there is no applicable national standard then the equipment shall meet or exceed the minimum requirements of the European standards.
3.
CoHE Pressure Fluid Safety module
The following equipment is required during the entire duration of this pressure fluid safety module to meet the need of the pressure fluid safety module: • PPE suitable for pressure fluids tasks (gloves, safety goggles, safety shoes or boots and suitable clothing or overalls)
•
Pressure gauge/manometer
Global Wind Organisation ©2025 / www.globalwindsafety.org
138 / 145
Made with FlippingBook Online newsletter maker