Safety training
Control of Hazardous Energies Standard / V3 2023-12-04
Target Group for the CoHE Pressure Fluid Safety Module This module is targeted at candidates whose scope of work will involve performing isolations and testing for the absence of pressure (in accordance with existing documentation) to be able to safely carry out specific tasks like component replacement, servicing and planned corrective maintenance on pressure fluid systems. Additionally, this person will also be responsible for establishing a safe work condition to enable others to work safely on pressure fluid systems.
Candidates, who already possess the intended knowledge, skills, and abilities of the GWO CoHE Standard can apply for merit using the GWO merit process.
Note
7.3 Aims and Objectives The GWO CoHE Standard will enable participants to manage the risks related to hazardous energies in the wind industry and act safely when in the vicinity of hazardous energies or when working on systems and equipment containing hazardous energies. 7.4 Duration of the GWO CoHE Standard Modules The total contact time for completing the stand-alone modules in the CoHE standard is 21 hours and 45 minutes. This is based on the times given in the module timetables and summarised in table 7-4 below.
The training provider must not exceed the times per day given in table 7-4.1, below.
Modules
Duration
CoHE Basic Safety Module
4 hours
CoHE Electrical Safety Module
10 hours 45 minutes
CoHE Pressure Fluid Safety Module
7 hours
Table 7.4.1 – Duration of CoHE Modules
Maximum Duration Per Day
Contact time
8 hours
Total training day
10 hours
Table 7.4.2 – Maximum durations for training days
Contact time includes delivery of course lesson content, practical exercises and activities directly related to these.
Note
Global Wind Organisation ©2023 / www.globalwindsafety.org
14 / 143
Made with FlippingBook Online newsletter maker