Safety training
Control of Hazardous Energies Standard / V3 2023-12-04
Qualified Electrical Person should do in a given situation could change depending on regional/company/WTG model rules
The participants shall:
Engage in the brainstorm about Qualified Electrical Person role, requirements, and responsibilities
Engage in the exercise and practise deciding what an Electrical Qualified Person should do in the situations or branching scenarios from a WTG environment
LESSON 3 - ELECTRICAL PPE
30 min.
The aim of this lesson is to enable the participants to reduce the risk of injury for themselves and others by being able to pre-use check the correct and required PPE for performing electrical work.
After successfully completing this lesson of the CoHE Electrical Safety Module, participants can:
17) Perform a correct pre-use check of the required electrical PPE for a given task defined as electrical work in the wind industry (Skills, intermediate level)
ELEMENT 3.1 - ELECTRICAL PPE
Learning objectives:
18) Participants can describe the minimum electrical PPE for a given task defined as electrical work in the wind industry (Knowledge, basic level)
19) Participants can recognise that the requirements for arc flash PPE depends on each situation as well as the importance of finding the specific site (or turbine specific) requirements if arc flash PPE is required for a task (Knowledge, basic level)
20) Participants can perform pre-use checks of PPE for electrical work (Skills, intermediate level)
21) Participants can explain how to store and maintain the electrical PPE (Knowledge, intermediate level)
Global Wind Organisation ©2023 / www.globalwindsafety.org
70 / 143
Made with FlippingBook Online newsletter maker