2023-12-04_CoHE_V3

Safety training

Control of Hazardous Energies Standard / V3 2023-12-04

Show and demonstrate the selection and use of appropriately insulated tools for working on batteries and capacitors:

a. insulated tools approved for the rated voltage must be used when working around live exposed conductors

Facilitate participants’ practice through relevant training task(s) or scenario(s) in selecting and use appropriately insulated tools for working on batteries

Give constructive feedback or facilitate peer feedback the participants’ performance throughout the training tasks or scenario

The participants shall:

Practise handling batteries and capacitors in a safe manner through the training tasks or scenarios

Practise selecting and using appropriately insulated tools for working on batteries and capacitors

LESSON 8 - HAZARDOUS ELECTRICAL SAFETY SCENARIOS

180 min.

The aim of the lesson is to enable the participants to support and care for themselves and others while working in the vicinity of electricity in a variety of scenarios in wind turbine work environments. To the greatest possible extent, the scenarios must challenge the participants to take responsibility for work with electricity or in its vicinity is performed safely.

After successfully completing this lesson of the CoHE Electrical Safety Module, participants can:

91) Act independently in selecting and using electrical safe working practices to reduce the associated risks of the electrical hazards related to working around electricity in a WTG environment (Ability, intermediate level)

92) Act independently in treating all electrical equipment as live until an electrically safe work condition has been established (Ability, intermediate level)

93) Act independently and safely in relation to the hazards posed by similar looking or adjacent energised equipment that is in reach (Ability, intermediate level)

94) Take responsibility for establishing an electrically safe work condition (Ability, intermediate level)

95) Act independently in following and completing safety documentation such as permits (Ability, intermediate level)

Global Wind Organisation ©2023 / www.globalwindsafety.org

99 / 143

Made with FlippingBook Online newsletter maker