Safety training
GWO Basic Safety Training / V18 2024-06-24
e.ii cam
e.iii energy absorber
e.iv connectors (carabiners)
f. all moving parts work correctly, with no excessive play
g. spring fitted buttons engage promptly when released
h. locking and catch mechanisms lock/release as intended
i. identify symbol/indication for correct orientation in use
j.
gravity stop functionality works as intended
k.
fall indicator
l. connectors (carabiners) operate (and lock) as intended, cannot disconnect completely and have not been extended/shortened
m. which attachment point on harness to connect to
n. observe manufacturer’s user manual for specific or additional requirements.
Stress the generic approach to pre-use inspections of a guided type fall arrester (glider/slider) focusing on similarities and differences in design, functionality and operation between different products Explain that the participant is always required to familiarise themselves with the specific guided type fall arrester product prior to use e.g. by reading the equipment instruction manuals and to familiarise themselves with the specific guided type fall arrester (glider/slider) prior to use
Facilitate practice for the participants before the practical exercises lesson
Provide constructive feedback on the participants’ performance during the practise
The participants shall:
Practise and demonstrate the ability to perform a pre-use inspection of a vertical fall arrest system including matching fall arrest glider/slider (demonstrated during this module)
ELEMENT 5.3 - CORRECT ATTACHMENT AND DETACHMENT
Learning objectives:
Global Wind Organisation ©2024/ www.globalwindsafety.org
111 / 301
Made with FlippingBook - Online catalogs