Safety training
GWO Basic Safety Training / V18 2024-06-24
During the evacuation scenarios participants who are not performing the exercise shall be in a safe area (at ground level) where they can familiarise themselves with setting up evacuation equipment and rigging the equipment for an evacuation
Note
An instructor shall be at the height chosen to descend from
Instructor(s) and participants shall be secured to an anchor point while waiting to descend. This can be achieved by correct use of the fall arrest lanyard
When participants are demonstrating the evacuation, a safety line that is connected to the participants’ harness shall be used. This will be set up and controlled by the instructor and be secured to a separate anchor point other than that of the evacuation device
Although not a requirement of this standard, participants may repeat the evacuation exercises should sufficient time be available
LESSON 13 - PPE REVIEW
10 min.
The aim of this lesson is to introduce the participants to the individual parts of the PPE equipment and enable them to use the PPE safely.
This lesson is intended to be a recap suitable for the beginning of day two of a training.
After having successfully completed this lesson, the participants can:
73) Discuss the individual parts of the PPE equipment, the correct pre-use inspection and use of the PPE (Knowledge, intermediate level)
ELEMENT 13.1 - THE INDIVIDUAL PARTS OF THE PPE EQUIPMENT
The participants shall:
Discuss the individual parts of the PPE equipment and instruction in pre-use inspection and use
LESSON 14 - RESCUE DEVICES AND RIGGING SETUP
20 min.
The aim of this lesson is to enable the participants to utilise a rescue device in a wind turbine environment.
After having successfully completed this lesson, the participants can:
Global Wind Organisation ©2024/ www.globalwindsafety.org
133 / 301
Made with FlippingBook - Online catalogs