Safety training
GWO Basic Safety Training / V19 02052025
The instructor shall:
Explain and demonstrate the individual parts of different rescue devices, including accessories, covering:
a.
how to attach the device to an anchor point
b. how to utilise an integrated friction device (e.g. pig tail/bull horn) to divert the rope
c. how to rig the device with deflection applying a friction connector (carabiner) for an active mode setup
d.
how to secure the rope
e. the use of a rope clamp for rescue (enabling lifting/safe disconnection of a loaded rope type fall protection lanyard)
Stress the generic approach in the parts of a rescue device focusing on similarities and differences in design, functionality, and operation between different products
Highlight the potential task placed upon the participant in (their own organisation at course completion) requiring them to familiarise themselves with other safety equipment products
Ask the participants open ended questions about the individual parts of the different rescue devices, including accessories
The participants shall:
Engage in answering the questions and share understandings about the individual parts of the different rescue devices, including accessories
ELEMENT 14.2 - CORRECT USE OF RESCUE DEVICES & SLINGS
Learning objectives:
87) The participants can recognise that pre-use inspection of the evacuation/rescue device may be omitted only if it is permitted by the manufacturer’s user manual and the manufacturer criteria (Knowledge, basic level)
88) The participants can describe how to perform pre-use inspection of the rescue device products required/chosen to instruct this module (Knowledge, basic level)
Global Wind Organisation ©2025/ www.globalwindsafety.org
140 / 312
Made with FlippingBook - Online catalogs