Safety training
GWO Basic Safety Training / V19 02052025
Demonstrate how to rig the device onto a ladder stile and reinforced rung utilising slings (on one side and in a centre position of the ladder system) aiming to enable moving parts of the device to run freely
Explain and demonstrate the principles of lifting angle, angle factor and edge protection
Demonstrate how to rig the device in passive mode setup, and active (inverted) mode setup with deflection/deviation applying a friction connector (carabiner)
Stress the generic approach in pre-use inspecting and using a rescue device focusing on similarities and differences in design, functionality, and operation between different products
Highlight the potential task placed upon the participant (in their own organisation at course completion) requiring them to familiarise themselves with other safety equipment products
Create a learning activity such as simple quiz, questionnaire or ask the participants open ended questions throughout about:
a. how to perform pre-use inspection of the rescue device products required/chosen to instruct this module
b. how to rig the device onto a ladder stile and reinforced rung utilising slings (on one side and in a centre position of the ladder system) aiming to enable moving parts of the device to run freely
c. the principles of lifting angle, angle factor and edge protection
d. how to rig the device in passive mode setup, and active (inverted) mode setup with deflection/deviation applying a friction connector (carabiner)
The participants shall:
Engage in answering the activity and share understandings about:
a. how to perform pre-use inspection of the rescue device products required/chosen to instruct this module
b. how to rig the device onto a ladder stile and reinforced rung utilising slings (on one side and in a centre position of the ladder system) aiming to enable moving parts of the device to run freely c. the principles of lifting angle, angle factor and edge protection how to rig the device in passive mode setup, and active (inverted) mode setup with deflection/deviation applying a friction connector (carabiner)
Global Wind Organisation ©2025/ www.globalwindsafety.org
142 / 312
Made with FlippingBook - Online catalogs