Safety training
GWO Basic Safety Training / V18 2024-06-24
Provide constructive feedback on the participants’ performance during the practice
The participants shall:
Practise the ability to attach a fall/travel restraint lanyard and work positioning lanyard correctly to the ladder system
Engage in discussing why fall prevention is preferred over fall arrest
Warm-up is introduced in Lesson 2 and will be unfolded in Lesson 9. To be loyal to the principles of safe behaviour, it is necessary to perform warm-up, when relevant
Note
ELEMENT 4.2 - PRE-USE INSPECTION
Learning objective:
31) The participants can perform a pre-use inspection of a fall/travel restraint lanyard and a work positioning lanyard (Skills, intermediate level)
The instructor shall:
Demonstrate how to perform pre-use inspection of a fall/travel restraint lanyard and work positioning lanyard products required/chosen to instruct this module, by the following principles and covering:
a.
markings and labels
b.
operating weight and temperature range
c.
equipment is within period of formal inspections
d. integrity, damage, corrosion, saltwater exposure and significant wear of:- lanyard rope, webbing, plastic, metal and heat-shrinkable tubing
e. all moving parts work correctly, with no excessive play
f. connectors (carabiners), and lock as intended and cannot disconnect completely
g. length adjustment function (if fitted) operates, and locks as intended
h. observe manufacturer’s user manual for specific or additional requirements
Global Wind Organisation ©2024/ www.globalwindsafety.org
164 / 301
Made with FlippingBook - Online catalogs