Safety training
GWO Basic Safety Training / V18 2024-06-24
m. which attachment point on harness to connect to
n. observe manufacturer’s user manual for specific or additional requirements.
Stress the generic approach to pre-use inspections of a guided type fall arrester (glider/slider) focusing on similarities and differences in design, functionality and operation between different products Explain that the participant is always required to familiarise themselves with the specific guided type fall arrester product prior to use e.g. by reading the equipment instruction manuals and to familiarise themselves with the specific guided type fall arrester (glider/slider) prior to use
Facilitate practise for the participants before the practical exercises lesson
Provide constructive feedback on the participants’ performance during the practise
The participants shall:
Practise and demonstrate the ability to perform a pre-use inspection of a vertical fall arrest system including matching fall arrest glider/slider (demonstrated during this module)
ELEMENT 5.3 - CORRECT ATTACHMENT AND DETACHMENT
Learning objectives:
38) The participants can perform the correct attachment of any vertical fall arrest glider/slider to the matching rail/wire (Skills, intermediate level)
The instructor shall:
Demonstrate how to attach and detach the glider/slider to the rail/wire of various vertical fall arrest systems
Explain that the symbol/indication for correct orientation in use of a given guided type fall arrester may not indicate the climbing direction, and that the equipment should always be used according to equipment manufacture’s user manual
The participants shall:
Practise and demonstrate the ability to correctly attach/detach a random glider/slider to the rail/wire of a matching vertical fall arrest system (prior to the practical exercises lesson of the working at heights module)
Global Wind Organisation ©2024/ www.globalwindsafety.org
169 / 301
Made with FlippingBook - Online catalogs