Safety training
GWO Basic Safety Training / V19 02052025
d.vi heat-shrinkable tubing
e. all moving parts work correctly, with no excessive play
f. connectors (carabiners) operate (and lock) as intended and cannot disconnect completely
g. length adjustment function (if fitted) operates, and locks as intended
h.
fall indicator
i.
which attachment point on harness to connect to
j. observe fall arrest type (e.g. Y- or V- or I-type) and required attachment procedures, in particular climbing with a twin fall arrest lanyard
k. observe product fall clearance (max. arrest distance)
l. observe manufacturer’s user manual for specific or additional requirements
Stress the generic approach to pre-use inspections of a fall arrest lanyard focusing on similarities and differences in design, functionality, and operation between different products
Explain the potential task placed upon the participant in their own organisation on course completion, requiring them to familiarise themselves with other safety equipment products
Provide constructive feedback on the participants’ performance during the practice
The participants shall:
Practise the ability to perform a pre-use inspection of any fall arrest lanyard (demonstrated during this element) before working at height during practical exercises
ELEMENT 6.3 - CORRECT ATTACHMENT TO HARNESS
Learning objective:
45) The participants can perform a correct attachment of a fall arrest systems to the harness (front and dorsal attachment points) (Skills, intermediate level)
The instructor shall:
Global Wind Organisation ©2025/ www.globalwindsafety.org
178 / 312
Made with FlippingBook - Online catalogs