Safety training
GWO Basic Safety Training / V18 2024-06-24
When participants are demonstrating the evacuation, a safety line that is connected to the participants’ harness shall be used. This will be set up and controlled by the instructor and be secured to a separate anchor point other than that of the evacuation device
Although not a requirement of this standard, participants may repeat the evacuation exercises should sufficient time be available
LESSON 14 - WORKSHOP – RISK/HAZARDS & SUSPENSION TRAUMA
30 min.
The aim of this lesson is to enable the participants to identify risks and hazards in a WTG environment (including suspension trauma) and to take responsibility for preventing them.
After having successfully completed this lesson, the participants can:
102) Take responsibility for working safely at heights in a wind turbine environment (Skills, advanced level)
ELEMENT 14.1 - USING THE BST WORKING AT HEIGHTS WITH MANUAL HANDLING COURSE
Learning objective:
103) The participants can explain multiple perspectives acquired through group discussions (Knowledge, intermediate level)
The participants shall:
Discuss how to best apply the skills learned during the BST Working at Heights training in a wind turbine environment
Share relevant experiences and reflections on the multiple perspectives acquired through group discussions
ELEMENT 14.2 - SUSPENSION TRAUMA
Learning objectives:
104) The participants can explain the cause of suspension trauma and ways to prevent it (Knowledge, intermediate level)
Global Wind Organisation ©2024/ www.globalwindsafety.org
203 / 301
Made with FlippingBook - Online catalogs