Safety training
GWO Basic Safety Training / V19 02052025
e. provide fall prevention by keeping the evacuation device rope’s end taut
f. safe and correct access to egress location (e.g. opening escape hatch door, rolled roof edge, etc)
g. deploying the rope bag and inspecting for knots/length (passive mode setup)
h. secure the rope bag to the harness (active mode setup)
i. holding onto the rescue device rope while getting into position for descent (e.g. getting out of the hatch)
j. transferring full body weight to the rescue device rope before descent (e.g. while sitting in the open hatch and putting tension on the rope)
k.
evacuating to ground level
l.
disconnecting the evacuation device
Facilitate practical exercises for the participants
Provide constructive feedback on the participants’ performance during the practice:
The participants shall:
Practise how to perform a safe and correct evacuation
ELEMENT 13.4 - SAFE BEHAVIOUR
Learning objective:
111) The participants can take responsibility for safe behaviour in connection with evacuation, including applying personal fall protection prior to commencing evacuation (Ability, intermediate level)
The instructor shall:
Explain safe behaviour in connection with evacuation
The participants shall:
Global Wind Organisation ©2025/ www.globalwindsafety.org
211 / 312
Made with FlippingBook - Online catalogs