Safety training
GWO Basic Safety Training / V18 2024-06-24
After successfully having completed this lesson of the BST Sea Survival Module, the participants can:
54) Take responsibility for conducting safe transfer for themselves between CTV and WTG TP (Ability, intermediate level)
ELEMENT 9.1 - PROCEDURES FOR TRANSFER BETWEEN CREW TRANSFER VESSEL AND WIND TURBINE GENERATOR TRANISITON PIECE
Learning objective:
55) The participants can perform transfer between CTV and WTG TP following the relevant procedures (Ability, intermediate level)
The instructor shall:
Explain and demonstrate the procedure for safe transfer between CTV and WTG TP and for the return transfer to CTV
Supervise participants’ pre-use inspection of PPE (quick connector included) prior to commencing transfer process
Conduct practical training of the procedure while focusing on safety and procedural commands
The participants shall:
Conduct pre-use inspection of PPE (quick connector included) prior to commencing transfer process
Practise the procedure for safe transfer between CTV and WTG TP and for the return transfer to CTV:
a. advance from the designated transfer waiting area to the transfer position upon the command “ADVANCE!” from the deckhand
b.
to prepare their quick connector
c. to connect their quick connector to the attachment point of the SRL when the deckhand calls out the command “TRANSFER!” and presents the SRL attachment point to them
d. to step across to the ladder and climb immediately after connecting to the SRL, with the SRL loose retrieval line over their shoulder
e. to immediately disconnect from the SRL on the command “ABORT TRANSFER!” from the deckhand
Global Wind Organisation ©2024/ www.globalwindsafety.org
243 / 301
Made with FlippingBook - Online catalogs