Safety training
GWO Basic Safety Training / V18 2024-06-24
a.
at least two different adjustable products
3.
Fixed length fall arrest lanyards with an energy absorber:
a.
one flexible Y-type
b.
one fixed adjustable Y – or I-type
c. recommended but not required: one fixed or flexible V-type
4.
Helmets
5.
Vertical fall arrest system with the following sliders/gliders:
a.
cable guide, twist type attachment
b.
cable guide, slot type attachment
c.
cable guide clamp type attachment
d.
rail type attachment
6.
Self-Retractable Lifeline (SRL)
7.
Slings
The European standard for slings specifies safety requirements and test methods for slings used for mountaineering (slings are used as anchor points and since there are no industrial standard for slings, they must also comply with the requirements listed in table A4-1 below)
Note
8. connectors (carabiners) with mandatory automatic closing and locking system
9.
Evacuation/rescue devices:
a.
one emergency descent and one rescue device, or
b.
different rescue devices
10. Rope clamp for rescue (enabling lifting/safe disconnection of a loaded rope type fall protection lanyard)
11.
Vertical aluminium ladders
12.
Anchor points
The height of the anchor point shall ensure that in the event of a fall there will be enough space below the anchor point to allow the shock absorber in a fixed length fall arrest lanyard to fully
Note
Global Wind Organisation ©2024/ www.globalwindsafety.org
251 / 301
Made with FlippingBook - Online catalogs