Safety training
GWO Basic Safety Training / V18 2024-06-24
Pushing and pulling risk assessment In pushing and pulling operations, the load might be slid, rolled, or moved on wheels. Observe the worker’s general posture during the operation. Figure 2 shows some acceptable push/pull postures. The task is likely to be low risk if:
the force is applied with the hands
•
the torso is largely upright and not twisted
•
• the hands are between hip and shoulder height
• the distance moved without a pause or break is no more than about 20m When do I need to make a more detailed assessment? If the load can be moved and controlled very easily, for example with one hand, you do not need to do a more detailed assessment. You should make a more detailed assessment using, for example, the RAPP tool or full risk assessment checklists (or equivalent) if: • the posture shows that the task requires significant forces, for example, leaning • here are extra risk factors like slopes, uneven floors, constricted spaces or trapping hazards
Figure 2 Acceptable push/pull postures 1
2.
Aggravating Factors The aggravating factors of the lifting operation must be considered which, individually and especially in combination, will enhance the strain on the musculoskeletal system posing a risk of injury and manual handling harmful to health.
Examples of aggravating factors; categorised by the four elements of the TILE principle:
Basic dynamic risk assessment – TILE principle
1 UK Government Copyright (by permission)
Global Wind Organisation ©2024/ www.globalwindsafety.org
266 / 301
Made with FlippingBook - Online catalogs