2024-06-24_BST_V18

Safety training

GWO Basic Safety Training / V18 2024-06-24

BST Manual Handling Module

Section 8.2. Duration of the BST Manual Handling Module:

Text updated

Section 8.5. Manual Handling Module timetable:

Text updated

Element 2.3

Text updated with the removal of “four”

BST Fire Awareness Module

Section 9.2. Duration of the BST Fire Awareness Module:

Text updated

Section 9.5. BST Fire Awareness Module timetable:

Text updated

BST Working at Heights Module

Section 10.2. Duration of the BST Working at Heights Module:

Text updated

Section 10.4. Equipment BST Working at Heights Module

Text revised and updated, including:

- Explanation of generic training “This enables the participants to conduct pre-use inspection and to use other safety equipment products compared to those taught during this module (based on the manufacturer’s user manual). However, a location specific risk assessment might identify the need for additional instructions. - The introduction of safety instruction “Additional fall protection must always be used during training activities at height. The training provider shall introduce control measures that lower the risks and hazards associated with a fall from height to an acceptable level, following the Hierarchy of Controls in their risk assessment.”

Section 10.5. BST Working at Heights Module Timetable:

• The table is updated according to changes in the lesson 8 and the accompanying text has been updated.

Element 5.2 – Pre-use inspection

Learning objective 30 updated

5.2.2, 5.2.4, 5.2.6 and 5.2.7 updated

Global Wind Organisation ©2024/ www.globalwindsafety.org

274 / 301

Made with FlippingBook - Online catalogs