Safety training
GWO Basic Safety Training / V19 02052025
• Sections 10.7, 12.7 and 13.7 have been aligned with the learning objectives in the lessons.
To align with the North American market there have been some wording changes throughout and the imperial measurements have been included where applicable. These changes do not affect the learning outcomes.
2019 - Working at Heights & Manual Handling Review
Working group to combine the two modules. Therefore, V13 of BST has 6 modules.
Insertion of new module 5 “Working at heights and manual handling combined”
Comprehensive review of both manual handling and working at heights modules
Document changes
Formatting of document changed and aligned throughout document, includes numbering all
sections, lessons, elements, sub-sections, and tables for ease of reference. Inserted Section 2 - Terms and definitions Section 3 - Change log layout changed, for ease of reading Annex 3 – Manual handling risk assessment moved to Annex 5 Equipment lists for all modules moved to Annex 3.
Inserted Annex 4 – Guideline for warm-up exercises
Anchor point height review
Requirement for anchor point height changed to a recommendation. With additional control measures if using a lower height.
Overall Changes
Version changed from 12 to 13
•
• Date changed to reflect most recent date of changes.
• Added level and domain to all learning objectives (e.g., L2 – Knowledge) for ease of understanding)
Aims for each lesson updated
•
• Taxonomy action verbs moved to each lesson element
• Module 5 Working at height & Manual Handling is Added
Section specific changes
1 Table of contents
Updated to reflect changes to standard.
•
2 Terms and Definitions
Global Wind Organisation ©2025/ www.globalwindsafety.org
297 / 312
Made with FlippingBook - Online catalogs