Safety training
Control of Hazardous Energies Refresher / V3 2023-12-04
• minimum electrical PPE and prohibited articles
approach boundaries
•
alertness
•
blind reaching prohibited
•
illumination
•
alerting techniques
•
body positioning
•
job briefing / pre-task briefing
•
good housekeeping
•
deranged equipment
•
d. treat all electrical equipment as live until an electrically safe work condition has been established
e. act independently and safely in relation to the hazards posed by similar looking or adjacent energised equipment that you can touch
f.
establish an electrically safe work condition
Following the assessment activities, then participants, who in the assessment activities demonstrated and are assessed by the instructor to have:
a. a gap between their abilities and the learning objective of this lesson, should be provided focused and specific learning activities to improve those participants´ performance until the participants have reached the learning objectives. These focused and specific learning activities could be worked examples demonstrated by instructor followed by guided and independent practice activities with feedback for the participants b. achieved the learning objectives of the CoHE Electrical Safety Refresher Module, are not required to spend any more time, or receive any additional specific training unless the participants are interested in learning more
Give constructive feedback to the participants performance throughout the activities of this lesson
See section 7.9 Design of the activities in the CoHE Refresher Standard for more information
Note
The participants shall:
Engage in the activities and think on the received feedback and use the feedback to improve their performance
Global Wind Organisation ©2023 / www.globalwindsafety.org
34 / 55
Made with FlippingBook - Online magazine maker