2023-12-04_CoHE R_V3

Safety training

Control of Hazardous Energies Refresher / V3 2023-12-04

• minimum electrical PPE and prohibited articles

approach boundaries


blind reaching prohibited


alerting techniques

body positioning

job briefing / pre-task briefing

good housekeeping

deranged equipment

d. treat all electrical equipment as live until an electrically safe work condition has been established

e. act independently and safely in relation to the hazards posed by similar looking or adjacent energised equipment that you can touch


establish an electrically safe work condition

Following the assessment activities, then participants, who in the assessment activities demonstrated and are assessed by the instructor to have:

a. a gap between their abilities and the learning objective of this lesson, should be provided focused and specific learning activities to improve those participants´ performance until the participants have reached the learning objectives. These focused and specific learning activities could be worked examples demonstrated by instructor followed by guided and independent practice activities with feedback for the participants b. achieved the learning objectives of the CoHE Electrical Safety Refresher Module, are not required to spend any more time, or receive any additional specific training unless the participants are interested in learning more

Give constructive feedback to the participants performance throughout the activities of this lesson

See section 7.9 Design of the activities in the CoHE Refresher Standard for more information


The participants shall:

Engage in the activities and think on the received feedback and use the feedback to improve their performance

Global Wind Organisation ©2023 / www.globalwindsafety.org

34 / 55

Made with FlippingBook - Online magazine maker