Safety training
Control of Hazardous Energies Refresher / V3 2023-12-04
participants have reached the learning objectives. These focused and specific learning activities could be worked examples demonstrated by instructor followed by guided and independent practice activities with feedback for the participants b. achieved the learning objectives of the CoHE Pressure Fluid Safety Refresher Module, are not required to spend any more time, or receive any additional specific training unless the participants are interested in learning more
Give constructive feedback to the participants performance throughout the activities of this lesson
See section 7.9 Design of the activities in the CoHE Refresher Standard for more information.
Note
The participants shall:
Engage in the activities and think on the received feedback and use the feedback to improve their performance
Relevant measuring equipment and PPE shall be available and used at all times during the scenario-based training.
Note
TRAINING REVIEW
10 min.
The aim of this lesson is to enable the participants to reflect on and process their learning outcome and key takeaways from the module, aiming to achieve a high learning transfer from the module to their way of working
ELEMENT 3.1 - TRAINING REVIEW
The instructor shall:
Re-present the overall aims and learning objectives of the module for the participants’ comparison of their learning outcome and the achievement of their previously stated expectations for the module:
The participants shall:
Reflect on their learning outcome and key takeaways from the CoHE Pressure Fluid Safety Refresher Module, aiming to achieve a high learning transfer from the module to their way of working by means of e.g.:
a.
group discussion or walk and talk
b.
questions and answers in class, or where suitable
Global Wind Organisation ©2023 / www.globalwindsafety.org
45 / 55
Made with FlippingBook - Online magazine maker