Operations training
Slinger Signaller Standard / V4 2023-05-02
ANNEX 3 - EQUIPMENT LIST The equipment required for training must be available and must fulfil national legal requirements where applicable. The following tools, materials and equipment are needed for the execution of the course: 1. Documentation: b. lift plan for loads being lifted during practical training (this should be based on the lift plan in Annex 2. Tools: a. two-way radios. 3. Slings: a. endless synthetic. b. web sling. c. chain. d. wire rope. 4. Spreader beam 5. Hooks 6. Shackles: a. bow type. Both screw pin and bolt-nut type with appropriate securing pins and rings. b. dee type. Both screw pin and bolt - nut type with appropriate securing pins and rings. 7. Lifting accessories: a. lifting bags. b. taglines. 8. Load attachments: a. eye bolts and nuts. b. swivel eyebolts. c. CLB/CLT container lugs (camlocks). d. permanent lifting lugs.
Global Wind Organisation©2023 / www.globalwindsafety.org
61 / 73
Made with FlippingBook Annual report maker