1 10 Table of contents 12 269

2024-06-24_BTT_V9

Technical Training

Basic Technical Training Standard/ V9 2024-06-24

Module 1: Mechanical Module 2: Electrical Module 3: Hydraulic Module 4: Bolt Tightening Module 5: Installation

5.2 Target Group The Basic Technical Training modules are targeted at candidates who have no previous experience of hydraulic, mechanical, electrical or installation systems, or working with energy powered bolt tightening, but may also be used to upskill candidates who have some knowledge but not of its application in wind turbines. 5.3 Aims and Objectives This BTT Training prepares participants for further company specific training by providing them with the necessary training to perform basic hydraulic, mechanical, electrical, bolt tightening and installation tasks.

This course will not make the participant a trained person who is allowed to perform hydraulic, mechanical, electrical, bolt tightening or installation work without supervision.

5.4 Duration of the Basic Technical Training Standard Modules The total contact time for completing the Basic Technical Training Standard is between 35 and 36 hours. This is based on the times given in the module timetables and summarised in tables 5.4.1, 5.4.2 and 5.4.3 below.

The training provider must not exceed the time per day given in table 5.4.4 below.

Modules

Duration

Mechanical

8 hours 40 minutes

Electrical

9 hours 55 minutes

Hydraulic

8 hours 55 minutes

Bolt tightening

8 hours 0 minutes

TOTAL 35 hours 30 minutes

Table 5.4.1 - Duration of GWO Mechanical and Installation Modules