Technical training
Basic Technical Training Standard / V9 2024-06-24
TOTAL
90 min.
6. Post task phase: Pack up and review
6.1
Post-use inspection and packing
6.2
Post-job documentation TOTAL
15 min.
Introduction to bolt tensioning in the wind industry using energy powered tools and accessories Attitude requirements for working with energy powered tensioning tools and accessories TOTAL
7. Framing the scenario: Bolt tensioning using energy powered tools
7.1
7.2
50 min.
Pre-task phase: Planning and preparation
8.
8.1
Planning the task
8.2
Preparing for the task
8.3
Planning for safety TOTAL
20 min.
9. The task phase: Safely and correctly tension bolts using hydraulic tools
9.1
Setting up equipment for use
9.2
Bolt tensioning
9.3
Bolt loosening
9.4
Safety, quality and trouble shooting TOTAL
90 min.
10. Post task phase: Pack up and review
10.1 Post-use inspection and packing
10.2 Post-job documentation TOTAL
15 min.
11. Using mechanical handling aids with bolt tightening tasks
11.1 Mechanical handling aids typically used in the wind industry 11.2 Using mechanical handling aids 11.3 Hazards associated with using mechanical handling aids 11.4 Mitigating hazards associated with mechanical handling aids TOTAL
35 min.
12. Training review
12.1 Training review TOTAL
15 min.
GRAND TOTAL
480 min.
Table 12.7.1 – BTT Bolt Tightening timetable
Global Wind Organisation / www.globalwindsafety.org
128 / 269
Made with FlippingBook Digital Proposal Creator