Technical training
Basic Technical Training Standard / V9 2024-06-24
12.7 BTT Bolt Tightening Module Timetable The Training Provider should deliver the training in sequential order, with the exception of the scenarios, here the training provider may choose the order of the scenarios (bolt torquing or tensioning) – the content of the scenario must be delivered in sequential order.
The delivery of this module must comply with the requirements described in the GWO Requirements for Training.
Lesson
Element
Duration
1. Introduction
1.1
Safety and emergency procedures
1.2
Facilities
1.3
Introduction
1.4
Aims and objectives
1.5
Ongoing assessment
1.6
Motivation
1.7
Human factors
1.8
Housekeeping TOTAL
45 min.
2. Bolt tightening in the wind industry
2.1
Limitations of the training
2.2
Recap of the BTT Mechanical
2.3
Bolt tightening theory
2.4
Quality assurance in bolt tightening TOTAL
55 min.
Introduction to bolt torquing in the wind industry using powered tools and accessories Attitude requirements for working with powered torquing tools and accessories TOTAL
3. Framing the scenario: Bolt torquing using powered tools
3.1
3.2
60 min.
4. Pre-task phase: Planning and preparation
4.1
Planning the task
4.2
Preparing for the task
4.3
Planning for safety TOTAL
30 min.
5. The task phase: Safely and correctly torquing bolts using electrical and hydraulic tools
5.1
Setting up equipment for use
5.2
Bolt torquing
5.3
Bolt loosening
5.4
Safety, quality and trouble shooting
Global Wind Organisation / www.globalwindsafety.org
144 / 298
Made with FlippingBook Digital Proposal Creator