Technical training
Basic Technical Training / V8 2023-05-02
The instructor shall:
Lead a discussion about how to mitigate the risks and hazards associated with the use of mechanical handling aids in bolt tightening tasks, including:
a.
Unintended retraction
b.
No lone set-up
c.
Getting the load onto the device
d. Positioning of the load when connect to the mechanical aid
Manual handling including a recommendation to take the GWO manual handling course if they have not already done so Ask participants involving questions about mitigating the risks and hazards associated with using mechanical aids
The participants shall:
Actively engage in discussions and answer questions about the risks and hazards associated with the use of mechanical aids during the bolt tightening
Share understandings and considerations with instructors and other participants
Take responsibility for their learning by seeking guidance and clarification when in doubt
LESSON 12 - TRAINING REVIEW
15 min.
The aim of this lesson is to enable participants to reflect on and process their learning outcomes and key takeaways from the module, aiming to achieve a high learning transfer from the module to the company specific training and performance in future bolt tightening tasks.
ELEMENT 12.1 - TRAINING REVIEW
The instructor shall:
Facilitate a review of the training using the, what, so what, now what model (Driscoll 2007), whereby participants reflect upon their learning outcomes and achievements in relation to their previously stated expectations for the module perceived understanding of how the learning will be applied to their future work. The instructor should structure the session in the following way:
Global Wind Organisation / www.globalwindsafety.org
170 / 262
Made with FlippingBook Digital Proposal Creator