Technical training
Basic Technical Training Standard / V9 2024-06-24
Instructor may use video or other appropriate learning aids to improve understanding of the risks associated with heavy bolt equipment and components and the subsequent use of mechanical handling aids.
Note
The participants shall:
Actively engage in discussions and answer questions about the hazards associated with using mechanical aids to move heavy equipment and bolt components
Share understandings and considerations with instructors and other participants
Take responsibility for their learning by seeking guidance and clarification when in doubt
ELEMENT 11.4 - MITIGATING HAZARDS ASSOCIATED WITH MECHANICAL HANDLING AIDS
Learning objective:
102) The participants can show interest in taking mitigating actions to reduce the safety and quality risks associated with using mechanical handling aids for bolt tightening tasks (Ability, basic level)
The instructor shall:
Lead a discussion about how to mitigate the risks and hazards associated with the use of mechanical handling aids in bolt tightening tasks, including:
a.
Unintended retraction
b.
No lone set-up
c.
Getting the load onto the device
d. Positioning of the load when connect to the mechanical aid
Manual handling including a recommendation to take the GWO manual handling course if they have not already done so
Ask participants involving questions about mitigating the risks and hazards associated with using mechanical aids
The participants shall:
Global Wind Organisation / www.globalwindsafety.org
173 / 269
Made with FlippingBook Digital Proposal Creator