Technical training
Basic Technical Training Standard / V9 2024-06-24
Give constructive feedback on the participant groups to enable the participants to be able to explain the risks and hazards of main component preparation, pre-assembly and assembly
The participants shall:
Analyse the examples to find the relevant risks and hazards
Engage in discussions about how the risks in the above examples can be mitigated
ELEMENT 7.3 - CHALLENGES WHEN ASSEMBLING MAIN COMPONENTS
Learning objectives:
64) The participants can recognise challenges when assembling the main components - i.e. tower- tower alignment, yaw alignment, etc. (Knowledge, basic level)
65) The participants can describe how the challenges of assembling the main components above can be mitigated and solved (Knowledge, basic level)
The instructor shall:
Give examples of and explain the challenges when assembling components:
a.
Foundation alignment
b.
Tower-Tower alignment
c.
Yaw alignment.
Facilitate discussions about how the challenges mentioned above can be mitigated and solved.
The participants shall:
Engage in discussions about how the challenges mentioned above can be mitigated and solved.
LESSON 8 - PRINCIPLES OF MECHANICAL COMPLETION
75 min.
The aim of this lesson is to give participants basic knowledge of mechanical completion.
Global Wind Organisation / www.globalwindsafety.org
203 / 269
Made with FlippingBook Digital Proposal Creator