Technical training
Basic Technical Training Standard / V9 2024-06-24
TOTAL
100 min.
7. Main component
7.1
Preparation, pre-assembly and assembly
preparation, pre-assembly and assembly
Risks and hazards associated with main component preparation, pre-assembly and assembly Challenges when assembling the main components TOTAL
7.2
7.3
50 min.
Principles of mechanical completion
8.
8.1
Introduction to mechanical completion
8.2
Examples of mechanical completion
Risks and hazards associated with mechanical completion TOTAL
8.3
75 min.
9. Principles of electrical
9.1
Introduction to electrical completion
completion including cable work
9.2
Examples of electrical completion
Risks and hazards associated with handling and working with cables
9.3
9.4
Different types of cables
9.5
Simple installation diagrams
9.6
Cutting and crimping cables
Marking, routing and termination of all cable types TOTAL
9.7
420 min.
10. Principles of hydraulic completion
10.1 Introduction to hydraulic completion 10.2 Examples of hydraulic completion 10.3 Risks and hazards associated with hydraulic completion TOTAL 11.1 Principles of yaw, rotor and blade operation with external generator 11.2 Risks and hazards associated with the operation of auxiliary systems with an external generator 11.3 Preconditions for the operation of a lift with an external generator 11.4 Preconditions for the operation of an internal crane with an external generator
40 min.
11. Principles of operation with external generators
Global Wind Organisation / www.globalwindsafety.org
204 / 298
Made with FlippingBook Digital Proposal Creator