Technical training
Basic Technical Training / V8 2023-05-02
LESSON 10 - PRINCIPLES OF HYDRAULIC COMPLETION
40 min.
The aim of this lesson is to give participants basic knowledge of hydraulic completion.
ELEMENT 10.1 - INTRODUCTION TO HYDRAULIC COMPLETION
Learning objective:
86) The participants can recognise the principles and application of hydraulic completion (Knowledge, basic level)
The instructor shall:
Explain that there are hydraulic tasks to be completed in the turbine after the main components have been installed
ELEMENT 10.2 - EXAMPLES OF HYDRAULIC COMPLETION
Learning objectives:
87) The participants can describe examples of topics during pre-assembly and installation while performing hydraulic completion (Knowledge, basic level)
88) The participants can describe the importance of following the work instructions (Knowledge, basic level)
89) The participants can describe the importance of cleanliness (Knowledge, basic level)
The instructor shall:
Show examples of and describe hydraulic tasks that need to be completed after the installation of the main components:
a.
Mounting of the hydraulics at the hub
b.
Connecting the hydraulic rotating union
c.
Mounting the hydraulic yaw brake (if present)
Global Wind Organisation / www.globalwindsafety.org
209 / 262
Made with FlippingBook Digital Proposal Creator