Technical training
Basic Technical Training Standard / V9 2024-06-24
TOTAL
30 min.
9. Cooling system
9.1
Components requiring cooling and why
9.2
Inspection of the cooling systems TOTAL
30 min.
10. Lubrication system
10.1 Components requiring lubrication and why 10.2 Inspection of the lubrication systems TOTAL
75 min.
11. Summary and theoretical test
11.1 Summary
11.2 Theoretical test TOTAL 12.1 Training review TOTAL
30 mins.
12. Training review
15 min.
GRAND TOTAL
520 min.
Table 9.5.1 – BTT Mechanical module timetable
9.6 Detailed Description of the BTT Mechanical Module LESSON 1 - INTRODUCTION
30 min.
The aim of this lesson is to enable the participants on the GWO BTT Mechanical Module training to engage in the training safely and with motivation, while recognising what is expected of them during the training.
If this module is delivered combined with other BTT modules to the same participants, the redundant introductory elements shall not be repeated.
Note
After having successfully completed this lesson, the participants can:
13) Describe the module content and the facilities involved to ensure a clear understanding of what is expected during the module (Knowledge, basic level)
14) Name and point out local emergency procedures and facilities (Knowledge, basic level)
15) Describe the relevant human factors and the implications thereof (Knowledge, basic level)
Global Wind Organisation / www.globalwindsafety.org
21 / 269
Made with FlippingBook Digital Proposal Creator