Technical training
Basic Technical Training Standard / V9 2024-06-24
ELEMENT 9.7 - MARKING, ROUTING AND TERMINATION OF ALL CABLE TYPES
Learning objectives:
84) The participants can describe typical faults during termination, and ways to mitigate these typical faults (Knowledge, basic level)
85) The participants can perform the marking, routing and termination of all cable types (Skills, intermediate level)
The instructor shall:
Show examples of and explain different types of marking and their purposes for all cable types:
a.
Cable and conductor
b.
Cabinet (diagram)
Show examples of and explain important factors when routing all cable types (inform participants to refer to work instructions for the specifics):
a.
Bending radius (why a minimum is important)
b.
Not twisted
c.
Distance between cable types and groups
d.
Fastening of cables: fixed vs flexible
e.
Cable protection tubes or edge protection
f.
Cable glands
Show examples of and explain important factors when handling fibre optic cables:
a. Handle with care due to fragility (lower it individually, do not combine with other cables when handling)
b.
Excess cable should not be cut out, but coiled
c. How to bend (coil bending radius) in accordance with work instructions
d. End protection caps are only to be removed just before the cable is connected to the individual processor
Demonstrate how to perform termination on signal cables:
Global Wind Organisation / www.globalwindsafety.org
211 / 269
Made with FlippingBook Digital Proposal Creator