Technical training
Basic Technical Training Standard / V9 2024-06-24
To reduce the risk of injury and damage to bolts and equipment it is recommended to use lower torque settings to complete practical torquing activities. If no safety handle is present do not perform operation.
Risk Assessment This scenario must be carried out in accordance with the training providers risk assessment of the training and training facilities.
In any WTG environment it is important for participants to read a job risk assessment prior to commencing work.
Hazardous Energies
In the real world it is important for participants to understand and follow company procedures for mitigating the risk of hazardous energies.
Lifting Equipment
This training scenario involves lifting and it is recommended that the instructor and participants follow the learnings provided by the GWO Basic Safety Manual Handling Module.
3. Reference Documents Risk Assessment The training provider may choose to make the risk assessment of the training available for the participants.
4. Bolt Torquing in General
4.1 Safety Precautions for the Use of Bolt Torquing Tools
It is mandatory to comply with the following safety precautions when handling tools for any bolt torquing task Electrical Torque Wrench with Reaction Arm
Training provider: Insert image of electrical torque wrench with reaction arm being used for training
Mandatory! Wear Eye Protection Type: to be filled out bey training provider
Global Wind Organisation / www.globalwindsafety.org
235 / 269
Made with FlippingBook Digital Proposal Creator