Technical training
Basic Technical Training Standard / V9 2024-06-24
11. Summary and theoretical test
11.1 Summary 11.2 Theoretical test TOTAL 12.1 Training review TOTAL
30 min.
12. Training review
15 min.
GRAND TOTAL
630 min.
Table 9.5.1 – BTT Mechanical module timetable
9.6 Detailed Description of the BTT Mechanical Module LESSON 1 - INTRODUCTION
30 min.
The aim of this lesson is to enable the participants on the GWO BTT Mechanical Module training to engage in the training safely and with motivation, while recognising what is expected of them during the training.
If this module is delivered combined with other BTT modules to the same participants, the redundant introductory elements shall not be repeated
Note
After having successfully completed this lesson, the participants can:
5) Describe the module content and the facilities involved to ensure a clear understanding of what is expected during the module (Knowledge, basic level)
6) Name and point out local emergency procedures and facilities (Knowledge, basic level)
7) Describe the relevant human factors and the implications thereof (Knowledge, basic level)
ELEMENT 1.1 - SAFETY INSTRUCTIONS AND EMERGENCY PROCEDURES
Learning objectives:
8) The participants can recognise the safety instructions, rules and emergency procedures (Knowledge, basic level)
9) The participants can show interest or curiosity in the safety and emergency procedures (Ability, basic level)
Global Wind Organisation / www.globalwindsafety.org
24 / 298
Made with FlippingBook Digital Proposal Creator